How to use IFTTT with TRIGGERcmd

[Russ]

@delkem, I'll give it a try. It should work the same way.

Method: POST
Content type: x-www-form-urlencoded
Body: token=(your token)

One problem I've had before was I had a space in the body field that I didn't notice. That could cause that error.

[delkem]

@Russ Thank You!!! yes, it was a space at the end of the token

[Russ]

@delkem, awesome! I'm glad that was it.

[triggercmddm]

Hi,

Am super-lovin' this

However, and trying to configure an IFTTT Button Widget to kick-off a webhook to my PC (PC name R1) to run the Reboot in 10 seconds command, but keep getting 401 errors - please help.

Am at the webhooks config page in IFTTT and entering the following:

URL: https://www.triggercmd.com/api/IFTTT?trigger=reboot&computer=R1
METHOD: POST
CONTENT TYPE: x-www-form-urlencoded
BODY: token=XYZ&params=russ.txt

<obviously <XYZ> is my token

What am I doing wrong please ?

Thanks so much,

Dan

[triggercmddm]

oops - that was for @Russ

[Russ]

FYI, for anyone reading, @triggercmddm got it working. He needed to change the trigger name from 'reboot' to 'Reboot in 10 seconds' and he needed to remove '&params=russ.txt' from the body.

URL: https://www.triggercmd.com/api/IFTTT?trigger=Reboot in 10 seconds&computer=R1
BODY: token=XYZ

[triggercmddm]

...so just for the record and to complete the loop.
@Russ just IM'd me and resolved the issue.
Amazing service and phenomenal customer journey

In brief, to reboot/restart your Windows 10 PC from an iOS Home Screen button click, do the following:

1. Install TriggerCMD Agent
2. Sign up/in to IFTTT
3. For the If bit: select Button Widget
4. For the Then bit: select webhooks and enter the following:
   i. URL: https://www.triggercmd.com/api/IFTTT?trigger=Reboot in 10 seconds&computer=R1
   ii. METHOD: POST
   iii. CONTENT TYPE: x-www-form-urlencoded
   iv. BODY: token=XYZ

Notes:
There are spaces in "Reboot in 10 seconds"
My computer name is "R1"
<obviously <XYZ> is my token

To add the button widget to your iOS home screen:

1. Tap the share icon (square with the up arrow)
2. Tap "Add to Home Screen"
3. Tap "Add"
4. Enjoy

[rpondevie]

I know this is an old post, but I wanted to share what I intent to do in order to illustrate what can be done with a very practical example.
I have a set of surveillance cameras. Some are indoor, some are outside. My associated software is iSpy. I also have a security system that only allows to get notifications via emails, as the Cie has its own proprietary surveillance system, at a different cost than mine (^_^). I want shut down the indoor and backyard cameras when I am in house, and turn them back on when I leave, or sleep, using the notification eMail. So, I plan on…

 Create 2 tasks conditions in IFTTT, for “Off” & “On”.
 Use <if><gmail> with proper filter on sender and subject), using respectively the words”Disarmed” & “Armed”.
 Use your method to trigger a batch commands to iSpy, that may look like this:
URL: https://www.triggercmd.com/api/IFTTT?trigger=run ispy.exe "recordstop.alarmset"&computer=MyPC
... where alarmset is the set of cameras to stop in this case.
I will keep you posted of the outcome.

[Russ]

@rpondevie, good luck. That's a cool project. I suggest you make your IFTTT URL something like this:

https://www.triggercmd.com/api/IFTTT?trigger=ispy&computer=MyPC&params=recordstop.alarmset

Then make a command with these values:

• Trigger = ispy
• Command = c:\program files\ispy\ispy.exe (probably a different path)
• Allow Parameters = true

[spotandjake 100]

@Russ how would I run it with multiple parameters I am trying to make a program where it moves the mouse with powershell when I run from the triggercmd website with parameters it run but when I run it like that my parameters do not pass threw only one does

 https://www.triggercmd.com/api/IFTTT?trigger=mouse&computer=LAPTOP-M0RN3NEB&params={{TextField}},{{NumberField}} 

[Russ]

@spotandjake-100, you can pass multiple parameters by separating them with a space, or a %20, so like this:

 https://www.triggercmd.com/api/IFTTT?trigger=mouse&computer=LAPTOP-M0RN3NEB&params={{TextField}}%20{{NumberField}}

[A Former User]

does the IFTTT webhook method work with a free account or only with subscription?
I tested with this comment without succes

https://www.triggercmd.com/api/IFTTT?trigger=Notepad&computer=PC
method = POST
Content-Type: application/x-www-form-urlencoded

with PC being the name of my computer as registered in my profile.

[Russ]

@koen-van-lent, it should work with a free account too, but only 1 per minute of course.

Do you have token=(your token from Instructions page) in the body?

[Mittal Makwana]

Yuppie, this works so well thank you for the article. I did a simple google assistace IFTTT applet to put my mac to sleep.

[Russ]

@Mittal-Makwana, nice, what command does that?